Double bike kickstand 26-28 inch for stable parking

Give a compatible bicycle a wide parking base with this adjustable two-leg kickstand. When unfolded, the bike rests on two legs instead of leaning on one side stand. This reduces sideways movement while loading panniers or the rear rack. The stand is intended for 26 and 28 inch wheels.

The product data lists dimensions of 26 x 5 x 36 cm and a weight of 560 g. The title names steel and aluminium, while the material field states iron. It is therefore described as metal. Load capacity, bolt size and complete rust resistance are not specified.

Main product features

• Adjustable two-leg kickstand for bicycles from 26 to 28 inches
• Two ground contact points for a wide parking base
• Central position beneath the frame, behind the bottom bracket
• Useful for everyday parking and loading bicycle panniers
• Listed dimensions: 26 cm long, 5 cm wide and 36 cm high
• Product weight: 560 g
• Colour: black
• Material: metal; the separate material field states iron
• Package dimensions: 26 x 21 x 20 cm
• Package contents: one double bicycle kickstand
• No manufacturer’s warranty specified

For city bikes, cargo bikes, hybrid bikes and e-bikes

This cargo bike kickstand works best with a central mounting point behind the bottom bracket. Many city, cargo and trekking bikes have a prepared fitting there. Two legs help during loading because the bicycle leans less than with a single bike kickstand.

The model may also fit a hybrid bike. Check that it sits flat and leaves brake cables, gear cables and battery wiring unobstructed. An e-bike also needs clearance around the motor housing and crank.

Check a mountain bike carefully. Wide tyres, exposed cables, rear suspension or a missing centre plate can prevent installation. Although mountain bikes are listed as a possible category, the frame determines compatibility. Never attach the stand around carbon tubes or thin frame sections without manufacturer approval.

A road bike kickstand requires an approved centre mount, which many road frames lack. Check the frame documentation before buying. Without a mounting point, choose a separate floor stand.

What should you check before ordering?

Do not check wheel size alone. Locate the fitting behind the bottom bracket and measure the space. Confirm that the folded legs clear the crank arms, pedals, chain and rear tyre. Identify the required bolt diameter, thread and length; these measurements are not listed.

A rear-chainstay kickstand uses a different fitting. If your bicycle has only chainstay mounts, choose a model designed for them. Never force a centre stand against an unsuitable frame surface.

How to install the double bicycle kickstand

1. Support the bicycle upright, remove the existing stand and clean the mounting area.
2. Compare the central frame mount with the kickstand connection. Identify the required bolt and follow the bicycle or frame manufacturer’s instructions.
3. Align the kickstand with the bicycle. Do not trap a cable, brake hose or electrical wire between the surfaces.
4. Start the correct fastener by hand. Tighten it to the torque specified by the bicycle manufacturer. No tightening torque is listed for this stand.
5. Adjust both legs equally. Test the bicycle on a hard, level surface and change the height if it leans sharply forwards, backwards or sideways.
6. Fold the stand, rotate the pedals and check clearance from the crank, chain, cables and rear tyre. Inspect the mounting again after the first rides.

Everyday use and maintenance

Hold the handlebar while lowering the stand and guide the bicycle gently backwards. Distribute shopping and other luggage between both panniers before releasing the bike. The legs may sink or slide on sand, grass, loose paving or a slope, so choose a firm and level parking surface.

This reinforced bicycle kickstand has a wider ground contact area than a side stand, but it is not a bicycle repair stand. Do not allow anyone to sit on the saddle or in a child seat while the bike rests on the kickstand. The maximum supported load is not specified.

Remove mud, sand and road salt with a damp cloth. Dry the metal and inspect the hinge, mount and legs for play, bending, cracks or corrosion. Stop use if any part is damaged.

When looking for an affordable bicycle kickstand, consider frame compatibility and mounting requirements as well as price. Discountershop offers a range of bicycle accessories and bicycle parts for parking and maintaining your bike. Check this model carefully before buying a double bike kickstand.

Buy from Discountershop

Package contents

• One adjustable double bicycle kickstand for 26-28 inch bikes
• Mounting hardware: not specified
• Manual language: listed as universal
• Manufacturer’s warranty: not specified

Frequently asked questions

Which measurements should I check before ordering this bike kickstand?

Check the wheel size, available space behind the bottom bracket, required bolt dimensions and clearance around the crank, cables and rear tyre. A 26-28-inch rating alone does not confirm compatibility with every bicycle frame.

Will one wheel lift off the ground on a double bike kickstand?

That depends on the frame geometry, mounting height and leg adjustment. On some bicycles, one wheel may touch the ground lightly or remain raised. The bicycle should stand securely without leaning sharply in any direction.

How should I load panniers while the bike is on the two-leg stand?

Place the bicycle on a firm, level surface and keep hold of the handlebar. Add the contents gradually to both panniers so that a sudden shift in weight does not unbalance the parked bicycle.

What should I do if my bicycle requires a different mounting bolt?

Use only a bolt with the correct diameter, thread, length and strength for the mounting point. Consult the bicycle manufacturer or a qualified mechanic, and never force an incompatible bolt into the frame fitting.